Don’t know how to load a non running car on a tow dolly ? You will be surprised to learn how easy is the process

Have you ever experienced a situation when your car suddenly stopped in the middle of the road?

Well, a lot of people have been in such situations, and trust us, it’s no joke. The situation gets terrible when there is no one around to help you out. However, a tow dolly can come in handy in these situations.

Those who know the process of how to load a non running car on a tow dolly can safely make their way out. However, those who don’t know can take help from this guide. Whether you call a professional or do it yourself. In either case, you need to keep a tow dolly with yourself.

Even though it’s a 5 to 10 minutes task, you need to be tactful to perform it. So here’s a quick way to load a non running car on a tow dolly.

Though, Before you get on this task, here are a few tips that you must check.

  • Before you load, always check the tires’ pressure.
  • Cross-check if the pins and chains of the tow dolly are properly tied.
  • Make sure your vehicle’s trunk is empty.
  • Make sure the car dolly ratchet, brake lights, straps, and all the other things are ready before you begin loading.

How to load a non running car on a tow dolly?

process of how to tow a non running car on a tow dolly
source:community.fmca.com

Time required for task completion: 5 minutes

Focus areas: tow dolly, security chains, tow vehicle, ratchet straps, and safety chains.

For moving your car, you need to have a car dolly with you because you never know when you feel the need to use it.

Now, the following are some steps that are crucial for towing a car on a tow dolly. Follow these, and you will be free within 5 to 10 minutes.

  • You need to find a flat surface where you can park your car and tow dolly. Make sure the couplers and safety chains are properly attached to your vehicle without touching the ground.
  • Now open the side ramps fully to prepare the tow dolly, lift it up to remove the straps of the tire, place them on the surface of the tow dolly, and place the vehicle in line with the tow dolly.
  • After doing that, the car is ready to get towed. However, it needs to be in the right position to begin the loading process. Ensure nothing is in between the car and the dolly, then start driving up to the ramp at a low speed. Continue driving until you reach the front end of the dolly.
  • Check if your car is in the right position or not. If it’s in the right position, then lock the seat belt and steering wheel.
  • There are other ways to move a steady vehicle. You can either choose the come-along tool for the uplifting process or simply use greasy metal plates. It totally depends on you. However, with metal plates, you will not have to spend extra dollars.
  • Use straps to secure the tires of your vehicle. Also, make sure your car tires are balanced so that you can place the ratchet. Next, firmly tighten and fold it after it is compatible with the wheel. For more security and tight fit, use S hooks.
  • Now, elevate the ramps and slightly place them back into the vehicle. Make sure your vehicle is parked, gently release the brakes and free your steering wheel.
  • Once done, slowly start driving your car, first left to right, then in all the directions. Check for any loose side, and fix it. Initially drive 5 miles, then increase up to 50 in the second round to ensure everything is tight and in place.

Tow Dolly – An essential accessory

Tow Dolly - An essential accessory
source:cartowdolly.com

Undeniably, a tow dolly is an essential tool. In the past, when there were no such things as a tow dolly, and you were stuck somewhere with your car, you would require a towing car to get through the situation. However, if you just carry a tow dolly, you won’t have to rely on outside help.

Tow dolly has been widely used in Northern countries and Australia, where the driving rules mandate the carry and use of tow dolly.

FAQs:

  • Can you use a tow dolly to tow a rear-wheel-drive car in neutral?

Yes, you can use a tow dolly to tow a rear-wheel-drive car. However, make sure the shaft is disconnected in order to dissipate the chances of transmission damage. Just putting the transmission on neutral will not prevent the damage as it requires excessive lubrication.

  • Can you tow a front-wheel car on a tow dolly?

Tow dollies are the best choice to tow a non-running vehicle because you don’t need anything else besides just a tow dolly. Moreover, towing a front-wheel car is even better as the front wheels will be on the dolly while the rear wheels stay on the road.

  • What should be the speed limit to drive with a tow dolly?

 It’s always better to drive a tow dolly at the speed of your convenience. However, on regular roads, exceeding 55 miles per hour will be dangerous.

  • Do you need to lock the steering wheel of the car on a tow dolly?

 The car on a tow dolly must be properly locked. If your vehicle is an old model and does not possess a steering wheel lock, you must firmly tie the steering wheel.

Conclusion

There are different parameters that one should consider to load a car on a tow dolly safely. Take help from the above-mentioned method, and you won’t be standing in a deserted area waiting for someone to help you out.

Lastly, carefully read all the instructions and take precautions to avoid any mishap. However, if you are still unsure about towing your car on the tow dolly, calling a professional would be wise.

Recent Posts

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

Leave a Comment